Copper Electrodes [sold out]

$0.00

.999  12 gauge Copper electrodes for making Colloidal Copper

Use Reuseable Adapters aka Ferrules [for those who wish to make their own Series 1 or Series 2 Electrodes] to adapt these copper electrodes to any older Series 1 or Series 2 model.

Making Colloidal Copper

Insert and position copper electrodes as usual.

Plug in the generator.
Wait 3 seconds and press the programming button for as many hours you want it to run.
I personally run a quart batch for around 24 hours.
Pinch the ends of the copper wires together to short the generator and trigger the program..the Yellow LED will start blinking. [each blink = 1 hour to go]
Place the generator with electrodes in distilled water and go away.


Copper is entirely different than silver.
It doesn't produce Ions, conductivity doesn't increase, therefore it will never have current "runaway"..meaning:  Current controls aren't being used and  the conductivity related "Auto Off" at 10 uS/PPM will not work.
Colloidal copper does not register on any meter making them TOTALLY useless.
Colloidal copper has no flavor or color.
The only way you can tell you made anything is with a laser pointer to view the Tyndall Effect [light beam] and that doesn't say much about  'how strong'
Do not mix silver and copper as copper will pull every trace of both out of the water and drop it to the bottom as a black fuzz.[and/or other weird things]
Be aware that consuming too much copper can be toxic and may alter your ability to eliminate silver.